Upright Protection

Column U Shape Guard

U-shaped type column guards are designed to go around the columns in your aisles. It is recommended that if using column guards in the aisles that a minimum 2743mm internal width beam is used to allow enough room for pallet entry below 400mm.

Powder coated orange finish as standard

Hot Dipped Galvanised option available

Corner L Shape Guard

Corner guards are designed to meet your minimum cross aisle and gang way safety requirements under the AS4084:2012 standard.

Corner guards are required at the meeting points of all cross aisles and gangways (usually this means two per end of a pallet rack aisle unless that pallet racking aisle is against a wall).

Powder coated orange finish as standard

Hot Dipped Galvanised option available

Rack Armour

It’s tough outer, or shock deflector, is made from an extremely tough polymer which can withstand significant impact and has persistence of shape to give ongoing protection as the unit reverts back to its original form.

The compact design is unique in that the curved edges deflect the impact away from the rack face.

The foam inner, or shock diffuser, acts to reduce inertia from any impact and diffuse the force along the whole length of the unit (600mm) rather than being concentrated at the point of impact. Any residual impact is therefore dissipated over a much larger area making it less likely to cause damage to your upright.

The patented design and unique use of materials means that Rack Armour can provide you with benefits not gained from traditional protection devices.
• Ergonomic design and close fit ensures minimal intrusion into pallet space
• State of the art materials effective down to – 40 degrees – cold store safe
• No fixing or bolts to be ripped off or to damage floors or racking
• Designed to have persistence of shape to ensure ongoing protection
• High visibility yellow as standard with any colour available ( subject to min)
• Fully transferable if you have a re-fit or move premises
• Three sizes to ensure Rack Armour will fit most types of racking
• Installs in seconds, simply “clips” onto your existing racking
• Impervious to acid, alkali, mould, rust and most solvents
• Fully tested for front and side impacts